GASTON, Miniature Air Motor Features

※Low air pressure start, small air consumption and high efficiency Gaston-micro air motor starting pressure as low as 0.05Mpa, air consumption is very small High-precision machined parts make the assembly of the motor extremely sealed, effectively reduce the leakage of compressed air, on the other hand, the rotational resistance of the motor is very small.

※High power small volume Different specifications with a diameter of 22mm to 80mm in diameter, the ratio of volume / power or weight / power is much smaller than the volume of the motor.※High torque, small size Only under 0.63Mpa air pressure, the air motor with a diameter of only 42mm safely outputs more than 200Nm torque at low speed, which is extremely difficult to do with general electric motors; the starting torque of air motors is much larger than that of electric motors of the same power.

※High speed The air motor with a small diameter of only 22mm can output 50,000rpm and maintain high dynamic balance stability.

※Simple and compact shape The regular cylindrical shape makes the application installation very easy, can be installed in a small machine or limited space, and is simple and beautiful; Can be replaced with housings of different materials, such as aluminum alloy or stainless steel;
※Frequent start, frequent shutdown The time constant determined by the ratio of inertia / power is small, so it can be started, stopped, and steered quickly or smoothly; Especially suitable for frequent start-up, shutdown occasions, reversing is very easy, Gaston air motor has passed 2 million start-up tests, no dead start, no jamming phenomenon.

※High adaptability The speed of the air motor can be changed with the load, until the overload shutdown will not cause any damage and burn to the air motor, even if the motor is not working, as long as the load is removed, the motor can run again, so the lower safety factor can be considered when choosing.
※Stepless speed regulation, flow control speed Simple torque adjustment, simple control The air to be supplied to the motor must be filtered and depressurized. Directional control valves need to supply air to the motor and rotate the motor when needed. Such valves can be electronically controlled, mechanically controlled or pneumatically controlled. Just adjust the flow valve or pressure regulating valve of the inlet/exhaust port, you can obtain stepless speed change (or torque change), from zero to the maximum tens of thousands of revolutions, the operation is very easy; Increase/decrease air pressure or air flow to control the speed of the air motor. When the motor is used in applications where it is not directional, a two-port or three-port two-position valve is sufficient. For motors that can rotate in reverse, a five-port three-position or two-port valve is required to ensure that the motor has a compressed air supply and residual air exhaust. The compressed air supply must have large enough pipes and valves to guarantee the maximum torque of the motor.
※Full specifications, many varieties Gaston air motor is divided into different series, there are right-handed, left-handed, two-way rotation, divided into different output speed, torque, and configured with different output shafts and different installation forms, so it can meet most of the industrial uses, we can design and manufacture special air motors according to customer needs.
※ Simple structure, long-term durability, high reliability The structure of the blade motor is relatively simple, only the blades need to bear friction, and the simple and reasonable mechanism can balance, safely and smoothly transmit high loads (or torques), so the air motor has a long service life and requires little maintenance.
※ High precision, accurate positioning The transmission mechanism is made of alloy steel - small volume and can withstand high load, and the use of imported high-precision CNC machining center processing, special heat treatment, precision assembly, strict testing and quality control, all motor stator inner cavity are quilted processing, high surface finish, so low friction, smooth operation, can meet the requirements of high-intensity operation and maintain a long service life; Bearings only use American or Japanese high-precision high-speed bearings - many times the service life of ordinary bearings, and can withstand larger loads and smaller clearance; The motor output shaft radial runout/axial channeling is very small, and can supply the machine tool spindle level of the ultra-high precision air motor, gaston air motor has been widely used in high precision machine tools.
※With explosion-proof performance No sparks, overheating (oil-air lubrication or grease lubrication design), explosion, short circuit (the power of the air motor is cooled compressed air) and other risk factors, Gaston air motor explosion-proof, not affected by electrical impact, especially suitable for flammable and explosive substances and even high temperature environments, such as the mixing of solvents, paints, chemicals, etc., also suitable for occasions requiring prevention of overheating.
※Easy maintenance, simple repair Simple motor structure is easy to repair, maintenance work is very simple, it is easy to replace individual parts, and most parts support companies have spare parts.